Thursday, February 14, 2008

Software Product Lines

This is the first of a series of articles on an approach to systems architecture called “Software Product Lines.” To introduce the concept, let’s ignore the word “software” for now and focus on what a product line is in a more general and tangible fashion.

If you are in the market for a laptop and go to Dell’s website, you have a choice of several different base models that can be configured to your specification. Once you select the base model, you can configure things such as the size of RAM, size of the hard drive, type of display, etc. What makes this possible is a hardware architecture of various components that can fit into the same slot – compatible electrically as well as physically. This allows Dell to create and mass produce (or purchase) several standardized components and simply plug them together to create a customized product at a reasonable cost in a short timeframe. When new technologies come out that require changes to the base product, like ATA laptop hard drives, Dell spins up a new product line with that one modification reusing the old technology and components that is still valid, tried, and true. This sounds like a great idea and solid common sense, doesn’t it?

As with anything, there are challenges to this approach. Take for instance a design flaw in one of the more heavily shared components, such as the motherboard, where the power connector solder joints go bad due to heat and constant plugging/unplugging. This one design flaw could end up costing dearly in repair and possibly recall expenses, as a significantly higher number of devices are impacted then if the system was not as modular. It is also significantly more difficult and time consuming up-front to design, build, and test a system that shares components. In a product line, tight adherence to specifications needs to be considered for future compatibility. Take for example the wireless network/Bluetooth riser cards found in many laptops. Let’s assume the bus timings are just a hair off spec, but the current crop of hardware is tolerant of it. Newer technologies coming out six months later may not be tolerant. A non-product line approach would be to make a revision of the entire system – which is required anyway; however, the product line approach requires significant expense to revise and test one or both of the components to assure compatibility.

Software is not very different than hardware when it comes to product lines. Most high-end software packages are heavily customizable so it can integrate into a variety of environments. Microsoft’s SharePoint product is one example, SAP is another. These two products are off-the-shelf packages intended to appeal to a very large market. There was heavy up-front investment by the vendor in design, documentation, interfaces, components, external training and certification programs, and more. But what if your product is very specialized with a small market? Even worse, what if your product is designed for small to medium sized businesses that typically can’t afford or will not have the resources to self-customize such a vast system? To top it all off, certainly, you cannot afford to invest in the amount of up-front work required to build, test, and debug a heavily customizable system given the small size of your target market.

Enter the concept of Software Product Lines. It is important to note that this is an engineering approach to solve a specific business problem. Using the Software Product Line methodology in a business environment that is not controlled or the problem domain of the customer is not well understood will cause you to paint yourself into a corner with no easy or cheap way out. Another salient comment is choosing this approach should not significantly change your development methodology (assuming, of course, that you have adopted a legitimate methodology in the first place). Finally, this approach is NOT a method of implementation, merely a way of thinking from a design perspective of what needs componentized. The decision to use a Service Oriented Architecture to implement a Software Product Line is off-topic – these are two different animals entirely.

Part II of this series will delve into some of these concepts deeper.

2 comments:

ttChipster said...

I've been aware of the "Software Product Lines" concept, with considerable research being done at Carnegie Mellon U., but haven't taken the time to investigate.
I'm looking forward to you boiling it down for us....

Bryan said...

Welcome back Dr. Bone. I missed you very much.